Adam R-Flow 3C flow meter 1 inch BSP(F) for diesel and oil 20 to 120 lpm 10 bar (145 psi)

Adam R-Flow 3C flow meter 1 inch BSP(F) for diesel and oil 20 to 120 lpm 10 bar (145 psi)

Price: $‎199.00 (Excluding GST)

In stock Sold out - more coming

 
Code: 12.3020A
Brand: Adam
Country of Origin: Italy
Weight: 2.2 kg
Condor Pumps is 100% Kiwi owned and operated
Need assistance? 
Phone Condor Customer Care
FreePhone 0508 044 055

Condor Pumps
Adam R-Flow 3C diesel and oil flow meter
Ports: 1 BSP(F) threaded and flanged
Suitable for pump type and gravity tank flow systems
Batch digit display: 3
Cumulative total digit display: 6 
Unit of measure: litres
Field calibration: Yes
Measuring system: mechanical type oscillating disc
Protection: IP55 
Outlet port position can be simply changed to: up, down, right or left
Performance:
Min flow rate: 20 lpm
Max flow rate: 120 lpm
Pressure max: 10 bar (145 psi)
Burst pressure: 30 bar (435 psi)
Temperature range: -20°C to +50°C
Accuracy: ± 1%
Repeatability: 0.2%
Noise at less 1 meter: <75 dBA
Materials:
Body: Aluminium
Gears: PBT
Orings: NBR
Other materials in contact with the fluid: brass, steel
Applications: 
- diesel fuel and light oils
- forbidden fluids: gasoline, petrol, alcohol, water
Carton dimensions: 
- 220 x 150 x 220 mm (L x W x H)
Approved fluids:
Diesel fuel and light oils
Forbidden fluids: 
Gasoline, petrol, alcohol, water
Applications:
Pump or gravity supply systems
About Adam Pumps
Adam Pumps of Italy was founded in 2010 following the management buy-out of Tuthill Italia Spa, the Italian branch of Tuthill Corporation, world leading manufacturer of pumps and meters for diesel, petrol, AdBlue and oil
Prior to Tuthill, the company had long been a specialist for diesel transfer solutions, as Gasco first and KSK after, giving Adam Pumps over 30 years experience.
At Adam Pumps the focus is on quality:
Quality of the products, all of which are conceived and designed at their technical department through the most accurate technologies and individually tested according to the most stringent parameters.
Quality control:
Manufacturing and assembling are all carried out at the Adam factory in Campogalliano, Italy which means our products are truly "Made in Italy".
Quality of the service and complete customer satisfaction is the end goal.
Manufacturing protocol guarantees efficiency and fast response.
Continuous improvement:
The Continuous Improvement philosophy ensures the customer requirements are met, fulfilled and exceeded.
Today Adam Pumps is located here:
Adam Pumps s.p.a.
Via della Resistenza 46/48
41011 Campogalliano (MO) 
Italy